Posted by: Wayne | September 16, 2010

Stringers glued

The lower three pairs of stringers are now glued.  I got them glued and clamped yesterday afternoon, and I was able to get pictures today after removing the clamps.  I also trimmed 10mm off of the stem to bring it down to plan height.  The king plank now has a bit less bend.

View from straight ahead

View of the front quarter

Looking aft from bulkhead 2

Looking forward over the transom

Looking forward through the tiller hole in the transom

I am planning on getting the bottom two rows of planking in place before mounting the gunwale stringers.  The force needed to bend them into place is significant, and I would like to stiffen the bulkheads to avoid tweaking things.  The next step will be to plane the lower stringer to take the garboard plank.  Then I get to trace, cut, fit, and install the garboards.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s


%d bloggers like this: